Filling

Had to fill the front of the headstock where the chunks of wood splintered off when the break occurred.  The back of the headstock area just below the nut has a deep gouge/hole that needs filling too.

I filed some mahogany wood to create sawdust to mix with my white glue, it was better than the wood filler I found at Home Depot.

Here's what it looks like after the filler dust mixed with the glue is poured on.

And from the back:  Not sure about the dark spot of the filler and how it will react with the stain later.








After some sanding the missing splintered wood is looked filled in.